MPN: LAP-GPS-US·By: Ubiquiti
Ships worldwide from the US.
The Ubiquiti LAP-GPS-US airMAX LiteAP GPS is a 5 GHz outdoor wireless access point designed for single band deployments. It supports 802.11a and 802.11ac wireless LAN standards and delivers a wireless transmission speed of 450 Mbps, suitable for bandwidth intensive point to multipoint links. The unit integrates a GPS based synchronization feature that helps colocated devices transmit and receive data in a coordinated manner, enhancing overall network stability. With one network RJ-45 port using 10 Gigabit Ethernet technology, it connects easily into existing wired infrastructure. The device is pole mountable, with a compact form factor measuring 14.2 inches in height, 4.9 inches in width, and 2.8 inches in depth, and weighs 1.7 pounds. Power consumption is specified at 7W, supporting efficient long term outdoor operation. This model is part of the UISP airMAX product line, optimized for outdoor wireless networking.
| Manufacturer part # | LAP-GPS-US |
|---|---|
| Brand | Ubiquiti |
| Condition | New |
| Model | LiteAP AC LAP-GPS |
| Beamwidth | 90 degrees |
| Radio Band | 5 GHz |
| Form Factor | Outdoor |
| Sector Type | High-performance sector AP |
| Antenna Gain | 17 dBi |
| Power Method | Passive PoE (24 V) |
| Product Line | UISP airMAX |
| Product Type | Wireless access point |
| Mounting Options | Pole mount |
| GPS Synchronization | Integrated GPS for AP synchronization |
| Maximum Throughput | 450+ Mbps |
|---|---|
| Real TCP IP Throughput | Up to 450+ Mbps |
| Wireless Mode | Sector access point |
|---|---|
| Ethernet Ports | 1 x Gigabit LAN port |
| Ethernet Interface | 10/100/1000 Ethernet |
| Wireless Data Rate | Up to 450 Mb/s |
| Wireless Technology | IEEE 802.11ac airMAX ac |
Use the LAP-GPS-US as a 5 GHz outdoor wireless access point where a single band, 802.11a and 802.11ac compatible link with 450 Mbps throughput is required.
Deploy as an outdoor sector access point at 5 GHz to provide single band coverage with 450 Mbps wireless transmission speed for multiple remote locations.
Integrate the access point into managed 5 GHz networks that leverage 802.11a and 802.11ac standards and require GPS synchronized operation between colocated devices.
Suitable for sites where power budgets are constrained, as the LAP-GPS-US has a specified power consumption of 7W while delivering 450 Mbps wireless performance.
Ideal for deployments that call for pole mounting, with a form factor designed specifically for pole mount installation in outdoor environments.
The Ubiquiti LAP-GPS-US supports 802.11a and 802.11ac wireless LAN standards. These standards operate in the 5 GHz band and enable the device to deliver a wireless transmission speed of 450 Mbps. This makes the access point suitable for outdoor deployments where higher throughput and compatibility with modern 5 GHz equipment are required.
The LAP-GPS-US has a specified wireless transmission speed of 450 Mbps. This throughput is delivered over the 5 GHz single band using 802.11a and 802.11ac standards. When designing networks, this 450 Mbps figure can be used to estimate capacity for user traffic, backhaul, or sector based point to multipoint connections.
The LAP-GPS-US integrates GPS frame synchronization, which enables colocated devices to transmit and receive data without interfering with each other. By using GPS timing, multiple access points can coordinate their transmission schedules. This coordination improves frequency reuse and contributes to more stable network performance in multi radio outdoor sites.
The device has a specified power consumption of 7W. This low consumption is useful for installations powered via PoE or where the power budget is limited, such as remote outdoor cabinets. Knowing that the unit draws 7W allows engineers to plan power distribution and backup capacity more accurately across multiple access points.
The LAP-GPS-US is designed with a pole mount form factor and mount type. This means it is intended to be installed on poles or masts commonly used in outdoor wireless deployments. Its physical dimensions are 14.2 inches high, 4.9 inches wide, and 2.8 inches deep, which helps in planning space and mounting hardware.
The LAP-GPS-US includes one network RJ-45 port that uses 10 Gigabit Ethernet technology according to the provided specifications. This single wired interface is used for both data and, when paired with a compatible injector or switch, power delivery. Network designers should allocate one Ethernet switch port per access point deployment.
Yes, the LAP-GPS-US is specified as an outdoor wireless access point operating in the 5 GHz frequency band with a single band network configuration. Combined with a 450 Mbps wireless transmission speed and GPS synchronization, these characteristics make it suitable for outdoor single band deployments such as point to multipoint sectors and backhaul links.
Details
Shipping, warranty & returns
No reviews yet — be the first to review this part.
We'll confirm availability and pricing for LAP-GPS-US, usually within one business day.
Order by 1:00 PM CST for overnight shipping
Secure SSL checkout. Visa, Mastercard, Amex and Discover accepted. ACH / wire available for businesses.
New, certified-refreshed and OEM stock with guaranteed compatibility, backed by warranty on every drive.
We process quotes, POs, stock documentation and compliance invoicing.
support@usithardware.comWe'll confirm availability and pricing for LAP-GPS-US, usually within one business day.
You might also want to check out these products.

Archer C5 V2 - TP-LINK AC1200 Wireless Dual Band Gigabit Router

FAP-221B-A - Fortinet 221B 802.11n 300Mbits 1x RJ-45 PoE Access Point

AX411-W - Juniper 300Mb/s Wireless Access Point

WLA522E-US - Juniper Wireless LAN Access Point

WLA522-WW - Juniper Wireless LAN Access Point

WLA322-WW - Juniper WLA322 802.11n 300Mbit/s 1-Port RJ-45 Access Point

FAP-221C-A - Fortinet 221C 5GHz 1x RJ-45 PoE Access Point

NBE-5AC-US - Ubiquiti NanoBeam AC 1-Port RJ-45 airMAX ac Bridge