HPE

HPE AP-763-US Wi-Fi 7 2x2 Flex Radio indoor AP

Name: HPE AP-763-US Wi-Fi 7 2x2 Flex Radio indoor AP
Brand: HPE
SKU: AP-763-US

MPN: AP-763-US·By: HPE

Part #:AP-763-USNewIn stock

Ships worldwide from the US.

Product overview

The HPE Aruba Networking AP-763-US is an indoor Wi-Fi 7 access point designed for modern WLAN environments that require flexible radio operation. As a Flex Radio 2x2 Wi-Fi 7 Dynamic Omni-Directional Indoor AP, it supports dual-stream wireless connectivity and is suitable for deployments where consistent coverage and radio agility are priorities. The dynamic omni-directional design is intended to provide uniform signal distribution in indoor spaces, supporting a variety of client layouts and densities. Classified as a WLAN access point within the wireless category, the AP-763-US enables organizations to standardize on Wi-Fi 7 technology while maintaining a compact indoor footprint. This model is positioned for environments that value a balanced combination of Wi-Fi 7 capability, 2x2 radio configuration, and flexible radio operation without adding unnecessary complexity. Procurement teams can align this access point with projects that call for next-generation indoor wireless infrastructure.

Wi-Fi 7 indoor WLAN access point
2x2 Flex Radio architecture
Dynamic omni-directional design
Aruba Networking AP-763-US model
Indoor deployment focused AP
HPE Aruba enterprise branding

Expedited and overnight shipping options are available at checkout, priced by destination and service.
Purchase orders accepted from qualified institutions.
Returns accepted within 90 days. Warranty terms vary by product - see our warranty & returns page, or contact US IT Hardware.

Featuring

Manufacturer part #	AP-763-US
Brand	HPE
Condition	New
Model	AP-763 (US) Flex Radio 2x2 Wi-Fi 7 Dynamic Omni-Directional Indoor AP
Series	HPE Aruba Networking 760 Series
Placement	Indoor
Radio Type	Flex radio dual-radio access point (5 GHz and 6 GHz or 2.4 GHz and 5 GHz configurable)
Technology	Wi-Fi 7
Form Factor	Wall mountable and ceiling mountable
Antenna Type	Dynamic omni-directional
Product Line	HPE Aruba Networking AP-763
Product Type	Wireless access point
Zigbee Radio	Integrated Zigbee 802.15.4 radio for IoT connectivity
GNSS Receiver	Built-in GNSS receiver
Antenna Design	Dynamic omni-directional internal antennas
Zigbee Support	Integrated Zigbee 802.15.4 radio
Frequency Bands	2.4 GHz; 5 GHz; 6 GHz
Application Usage	Campus and office indoor deployments
Integrated Sensors	Barometric pressure sensor
MIMO Configuration	2x2 MIMO per radio
Power Input Method	Powered through PoE over 2.5 GbE RJ-45 uplink port
Radio Configuration	Flex Radio 2x2
Tri-Band Capability	Tri-band capable dual-radio access point supporting any two of 2.4 GHz, 5 GHz and 6 GHz
Multiple BSSID Support	Supports multiple BSSIDs
Maximum Data Rate (5 GHz Band Only)	Up to 4.3 Gbit/s on the 5 GHz band
Maximum Data Rate (6 GHz Band Only)	Up to 5.76 Gbit/s on the 6 GHz band
Maximum Data Rate (2.4 GHz Band Only)	Up to 688 Mbit/s on the 2.4 GHz band
Maximum Aggregate Data Rate (All Bands)	Up to 5.8 Gbit/s maximum aggregate wireless data rate
Maximum Aggregate Data Rate (5 GHz + 6 GHz)	Up to 4.3 Gbit/s aggregate using dual 2x2 MIMO radios (5 GHz and 6 GHz)
Maximum Associated Client Devices per Radio	Up to 400 associated client devices per radio

Networking Ports & Interfaces

PoE Support	Power over Ethernet input via RJ-45 uplink port
Ethernet Ports	1 x 2.5 Gigabit Ethernet RJ-45 port (LAN)
GNSS Interface	Integrated GNSS receiver for location and timing services
Bluetooth Radio	Integrated Bluetooth 5.4 Low Energy radio for IoT and location services
Bluetooth Support	Bluetooth 5.4 Low Energy
Network Band Type	Tri band
Wireless Standard	IEEE 802.11be
Ethernet Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz
Management Interface	Managed as part of Aruba networking wireless infrastructure (controller-based or cloud-managed, depending on deployment)
Uplink Interface Type	Multi-gigabit Ethernet (mGig) copper uplink
Ethernet Interface Speed	2.5 Gbps over RJ-45
Wireless Transmission Speed	5.80 Gbit/s
Power over Ethernet Standard	Compatible with IEEE 802.3af/at Class PoE power from upstream switch or injector

Best for

Indoor Wi-Fi 7 upgrades
Suitable for organizations standardizing on Wi-Fi 7 in indoor environments, using the AP-763-US as an indoor WLAN access point with Wi-Fi 7 capability.
2x2 Flex Radio deployments
Appropriate for networks that plan around a 2x2 Flex Radio design, leveraging the dual-stream radio configuration for balanced capacity and coverage.
Omni-directional coverage
Useful in layouts where dynamic omni-directional coverage is required to serve users distributed around the access point in indoor spaces.
Standardized WLAN access layer
Fits projects that specify a categorized indoor WLAN access point, aligning with wireless access architectures based on Wi-Fi 7 and 2x2 radios.
Flexible radio planning
Supports environments where radio planning favors flex radio operation, allowing teams to design around a flexible 2x2 Wi-Fi 7 indoor platform.

Frequently asked questions

What Wi-Fi standard does the HPE Aruba AP-763-US support?

The HPE Aruba Networking AP-763-US is identified as a Wi-Fi 7 access point. This means it is designed for deployments that plan around the Wi-Fi 7 generation for indoor WLAN infrastructure. When specifying this model, procurement teams should treat it as part of a Wi-Fi 7 access layer strategy for new or refreshed environments.

What is the radio configuration of the AP-763-US access point?

The AP-763-US is described as a Flex Radio 2x2 Wi-Fi 7 access point. This indicates a dual stream radio configuration coupled with flex radio capabilities. Network designers can plan coverage and capacity based on a 2x2 radio profile, which supports standardized designs across multiple similar indoor locations.

Is the Aruba Networking AP-763-US suitable for indoor deployments?

Yes, the Aruba Networking AP-763-US is explicitly categorized as an indoor access point. It is listed as a Dynamic Omni-Directional Indoor AP within the wireless WLAN access point category. This makes it appropriate for offices, campuses and other interior environments where indoor rated Wi-Fi 7 infrastructure is required.

What type of antenna behavior does the AP-763-US provide?

The AP-763-US is described as a dynamic omni-directional indoor access point. This indicates that its design focuses on delivering omni-directional coverage around the unit in indoor spaces. When planning deployments, teams can assume a coverage pattern intended to serve users positioned in different directions around each access point.

How should the AP-763-US be classified in a network bill of materials?

The AP-763-US should be classified as an HPE Aruba Networking AP-763 Flex Radio 2x2 Wi-Fi 7 Dynamic Omni-Directional Indoor WLAN access point. This aligns it with wireless access infrastructure in the bill of materials and distinguishes it from outdoor or non Wi-Fi 7 devices in multi product deployments.

Details

Shipping, warranty & returns

Customer reviews

No reviews yet — be the first to review this part.

Price on requestRequest a Quote

We'll confirm availability and pricing for AP-763-US, usually within one business day.

Order by 1:00 PM CST for overnight shipping

Bulk order?

Request a custom quote for volume pricing.

Request a custom quote

Have questions?

Talk to our customer service team.

Chat Phone Email

Free ground shipping over $100

Secure SSL checkout. Visa, Mastercard, Amex and Discover accepted. ACH / wire available for businesses.

Buy with confidence

New, certified-refreshed and OEM stock with guaranteed compatibility, backed by warranty on every drive.

Business account benefits

Net payment terms
Dedicated account rep
Warehousing & scheduled releases
Stock testing reports

Set up your business account →

Govt, federal & edu procurement

We process quotes, POs, stock documentation and compliance invoicing.

support@usithardware.com

Manufacturer part #

AP-763-US

Brand

HPE

Condition

New

Model

AP-763 (US) Flex Radio 2x2 Wi-Fi 7 Dynamic Omni-Directional Indoor AP

Series

HPE Aruba Networking 760 Series

Placement

Indoor

Radio Type

Flex radio dual-radio access point (5 GHz and 6 GHz or 2.4 GHz and 5 GHz configurable)

Technology

Wi-Fi 7

Form Factor

Wall mountable and ceiling mountable

Antenna Type

Dynamic omni-directional

Product Line

HPE Aruba Networking AP-763

Product Type

Wireless access point

Zigbee Radio

Integrated Zigbee 802.15.4 radio for IoT connectivity

GNSS Receiver

Built-in GNSS receiver

Antenna Design

Dynamic omni-directional internal antennas

Zigbee Support

Integrated Zigbee 802.15.4 radio

Frequency Bands

2.4 GHz; 5 GHz; 6 GHz

Application Usage

Campus and office indoor deployments

Integrated Sensors

Barometric pressure sensor

MIMO Configuration

2x2 MIMO per radio

Power Input Method

Powered through PoE over 2.5 GbE RJ-45 uplink port

Radio Configuration

Flex Radio 2x2

Tri-Band Capability

Tri-band capable dual-radio access point supporting any two of 2.4 GHz, 5 GHz and 6 GHz

Multiple BSSID Support

Supports multiple BSSIDs

Maximum Data Rate (5 GHz Band Only)

Up to 4.3 Gbit/s on the 5 GHz band

Maximum Data Rate (6 GHz Band Only)

Up to 5.76 Gbit/s on the 6 GHz band

Maximum Data Rate (2.4 GHz Band Only)

Up to 688 Mbit/s on the 2.4 GHz band

Maximum Aggregate Data Rate (All Bands)

Up to 5.8 Gbit/s maximum aggregate wireless data rate

Maximum Aggregate Data Rate (5 GHz + 6 GHz)

Up to 4.3 Gbit/s aggregate using dual 2x2 MIMO radios (5 GHz and 6 GHz)

Maximum Associated Client Devices per Radio

Up to 400 associated client devices per radio

PoE Support

Power over Ethernet input via RJ-45 uplink port

Ethernet Ports

1 x 2.5 Gigabit Ethernet RJ-45 port (LAN)

GNSS Interface

Integrated GNSS receiver for location and timing services

Bluetooth Radio

Integrated Bluetooth 5.4 Low Energy radio for IoT and location services

Bluetooth Support

Bluetooth 5.4 Low Energy

Network Band Type

Tri band

Wireless Standard

IEEE 802.11be

Ethernet Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz

Management Interface

Managed as part of Aruba networking wireless infrastructure (controller-based or cloud-managed, depending on deployment)

Uplink Interface Type

Multi-gigabit Ethernet (mGig) copper uplink

Ethernet Interface Speed

2.5 Gbps over RJ-45

Wireless Transmission Speed

5.80 Gbit/s

Power over Ethernet Standard

Compatible with IEEE 802.3af/at Class PoE power from upstream switch or injector